Electric Vehicle Battery and Energy Storage Tape Solutions
Specialty Tapes and Materials for Electric Vehicle Battery and Energy Storage
When battery and energy storage systems require thermal and electrical insulation of components, specialty pressure sensitive adhesive (PSA) tapes are the solution engineers choose. These tapes offer industrial strength thermal management, electrical insulation, shock absorption, and prevent fluid intrusion. As electrical insulation and barrier materials, they are ideal for Electric Vehicle battery and ePowertrain systems as well as Electric Vehicle charging infrastructure. are designed to handle demanding environments.
At Engineered Materials, we work with OEMs and system integrators to provide custom-converted PSA tapes tailored to the specific demands of Electric Vehicle battery and energy storage systems.
Our specialty electrical insulation and thermal management materials are selected for dimensional stability, high dielectric strength, and excellent resistance to arc, ignition, and tracking. When combined with our custom converting capacities, this makes sure you get the performance, safety, and compliance you need for your application environment.
Whether you’re looking to improve thermal barriers or enhance electrical insulation, our tapes are easy to convert, cost-effective, and engineered to meet the strict reliability standards of the tech industry.
Custom PSA Tape Solutions for
Electric Vehicle Batteries and Energy Storage Systems
Cell-to-cell thermal runaway propagation
Vent path protection
Sealing against fluid intrusion
EV battery assembly and disassembly
Electric Vehicle battery electrical insulation and connection
Electromagnetic interference protection
Lightweighting and thermal management
Cushioning to protect from shocks and vibration
eMotor assembly and manufacturing
Thermal interface materials for heat sinks
Cold plate insulation
Module housing insulation
Electrical cell barriers
Venting path barriers
Venting hole covers
Equipment mounting and securing
Environmental monitoring
Airflow management
Why Use PSA Tapes for Your Electric Vehicle Battery and Energy Storage Systems?
Improve Performance, Durability, and Aesthetics
High sheer strength and bonding to structural adhesives
High electrical insulation and dialectic strength
Fulfills cleanliness requirements
Peel adhesion on aluminum
Bubble-free application
Can act as gap fillers
Resistance against hot particle burn-through
Thermal and electrical conductivity
High temperature resistance
EMI / RFI Shielding
Shock absorption
Blast resistance
Fire retardant versions
Mechanical reinforcement
Thermal isolation
Low tack for easy positioning
Our Products Meet Federal Regulations and Industry Specifications
UL510A Standard, Category OANZ2, (1350F, 1351, 1350T, 1388)
CSA certified: Standard C22.2 No. 66, Class 9052-30
Flame-retardant, UL temperature rated up to 200°C (392°F)
UL 94 V0
Flame resistant up to 1000°C (1832°F) for at least 10 minutes
Find the Right PSA Tapes for Your Application
-
3M™ Torch Flame Resistant Barriers TFRB-SE1 and TFRB-SE3
3M™ Flame Barrier FRB-NT
-
Polyester Film-Based
3M™ Polyester Film Electrical Tape 1350F-1
3M™ Polyester Film Electrical Tape 1350F-2
Glass Cloth-Based
3M™ Glass Cloth Electrical Tape 9
Polyimide-Based
3M™ Polyimide Film Electrical Tape 92
UV-Inhibited (UVi)
3M™ UVi Electrical Insulation Tape 1924B-1
-
Acrylic-Based
3M™ Thermally Conductive Acrylic Interface Pad
55713M™ Thermally Conductive Acrylic Interface Pad
5590H
Silicone-Based
3M(TM) Thermally Conductive Silicone Interface
Pad 5583S
Tflex 300 / 300 TG
-
3M 4492 DC Polyethylene Foam tape
Avery Dennison FM 2333 DC Polyethylene Foam Tape
Avery Dennison FT 8217 Double-Sided SB Non-Woven Tape
-
Silicone Foam
Bisco HT-870 Soft Silicone Foam
Bisco HT-800 Medium Silicone Foam
Bisco HT-820 Firm Silicone Foam
Bisco HT-840 Extra Firm Silicone Foam
St. Gobain NORSEAL F-12 Low Density Silicone Foam
St. Gobain NORSEAL F-20 Medium Density Silicone Foam
Bisco BF-1000 Extra Soft Silicone Foam
Silicone Sponge
St. Gobain NORSEAL R10480S Silicone Sponge
St. Gobain NORSEAL R10470M Silicone Sponge
St. Gobain NORSEAL R10470F Silicone Sponge
St. Gobain NORSEAL R10400M Silicone Sponge
St. Gobain NORSEAL R10460 Silicone Sponge
Silicone Rubber
Solid Silicone Rubber 20 Duro
Solid Silicone Rubber 30 Duro
Solid Silicone Rubber 40 Duro
Solid Silicone Rubber 50 Duro
Solid Silicone Rubber 60 Duro
Solid Silicone Rubber 70 Duro
Solid Silicone Rubber 80 Duro
Our Process
Material Selection. Custom Fabrication. On-Time Delivery.
Discovery
We ask all the right questions to help you find the solutions to your adhesive issues. On which surfaces will the tape be applied? Is the surface rough, smooth, curved, or irregular? What are the weight requirements? Is the tape permanently placed or will it need to be removable? We take the time to understand the furniture you manufacture and where and how it will be used. Our discovery process is thorough, but we make it easy for you to find exactly what you need.
Material Selection
Choosing the right materials depends on the surfaces being bonded, their texture, and the environment in which the furniture will be used. We stock a wide range of adhesive transfer tapes, VHB (Very High Bonding) tapes, double and single-sided tapes, and many other materials specifically designed for any application. We help you select the right material and adhesive coat weight based on the furniture you manufacture and how the tape needs to be used.
Custom Fabrication
We custom fabricate all our materials to create the perfect fitting part for your furniture, every time. From laminating to slitting, die cutting, kiss cuts, laser and waterjet cutting, and so much more, we have the capabilities and experience to create any custom shape that fits your adhesive needs. Not sure exactly what you need? No worries! Our parts design specialists can help you with product design, prototyping, testing, and implementation of brand-new parts for your furniture!