3M™ Glass Cloth Electrical Tape 27

3M™ Glass Cloth Electrical Tape 27 is a white glass cloth tape coated on one side with a thermosetting rubber pressure-sensitive adhesive that requires no heat, moisture, or other preparation for application. Rated for continuous operation up to 150°C (302°F) and UL-listed, it's designed for 600-volt dry coil wrapping and motor-lead connector work.

Application Ideas: Coil outer wrapping, insulating motor lead connectors

Temperature Resistance: Continuous operation to 150°C (302°F) for UL listing, 130°C (266°F) for CSA listing

Adhesive Type: Thermosetting Rubber

3M™ Glass Cloth Electrical Tape 79

3M™ Glass Cloth Electrical Tape 79 combines a glass cloth backing with a non-corrosive acrylic pressure-sensitive adhesive that adheres without heat, moisture, or other preparation. It's rated for continuous operation up to 155°C (311°F) per UL listing and is suited for coil cover, anchoring, banding, and crossover insulation.

Application Ideas: Coil cover, anchor, banding, core layer, and crossover insulation

Temperature Resistance: Continuous operation up to 155°C (311°F) per UL listing

Adhesive Type: Acrylic

3M™ Glass Cloth Electrical Tape 69

3M™ Glass Cloth Electrical Tape 69 features a glass cloth backing and a non-corrosive, high-temperature, flame-retardant thermosetting silicone adhesive that adheres without heat, moisture, or other preparation. It is rated for continuous operation up to 200°C (392°F).

Application Ideas: Outer wrap for bobbin-wound coils, banding arbor-wound coils, lead pad hold-down, end turns, lead anchor and connections

Temperature Resistance: Continuous operation to 200°C (392°F) with UL listing, 180°C (356°F) with CSA listing

Adhesive Type: Thermosetting Silicone

3M™ Glass Cloth Tape 361

3M™ Glass Cloth Tape 361 is coated with a silicone adhesive engineered for high-temperature resistance and strong adhesion. It has a durable, abrasion-resistant glass cloth backing.

Application Ideas: High-temperature ducts or chambers, submerged-arc welding backup strip, and heat treatment with clean tape removal

Temperature Resistance: Long-term to 232°C (450°F), intermittent to 550°F (288°C) or higher

Adhesive Type: Silicone

3M™ Glass Cloth Tape 365

3M™ Glass Cloth Tape 365 is a thermosetting rubber-resin adhesive tape with a strong, conformable glass backing for applications requiring high adhesion to a variety of surfaces. When subjected to a thermosetting cycle, the adhesive crosslinks to provide stronger bonding and greater solvent and heat resistance.

Application Ideas: Splicing and insulation at elevated temperatures, corrosion-resistant wrap for stainless-steel hot-air ducts, and splicing rough or low-strength materials

Adhesive Type: Thermosetable Rubber-Resin

3M™ Glass Cloth Tape 398FR/FRP

3M™ Glass Cloth Tape 398FR/FRP combines an acrylic adhesive with an abrasion-resistant glass cloth backing and offers flame-retardant properties. It's typically used to seal aircraft cargo bay panels, providing a permanent seal. It meets the flame-retardancy requirements of FAR 25.853 and FAR 25.855.

Application Ideas: Sealing thermal and acoustic insulation panels, aircraft window and duct sealing, seat repair, and wire harness, cable, and hose protection

Temperature Resistance: Long-term to 121°C (250°F)

Adhesive Type: Acrylic

CHR® 2905-7R Glass-Cloth Tape

Saint-Gobain CHR® 2905-7R Glass-Cloth Tape features a heat-resistant fiberglass cloth backing coated with silicone adhesive on both sides. It's exceptionally stable at high temperatures, withstanding up to 260°C, and is non-corrosive, making it suitable for critical electrical applications.

Application Ideas: High-temperature masking for metalizing or plasma-spray coating, holding tape for circuit board components, inner wraps for coils and transformers, and high-temperature splicing

Temperature Resistance: -73 to +260°C (-100 to +500°F)

Adhesive Type: Silicone

CHR® 2905-10R Glass-Cloth Tape

Saint-Gobain CHR® 2905-10R features a heat-resistant fiberglass cloth backing coated with silicone adhesive on both sides. At 0.254 mm, it's the thickest, most abrasion-resistant, heavy-duty option in the 2905 line.

Application Ideas: High-temperature masking for metalizing or plasma-spray coating, holding tape for circuit board components, inner wraps for coils and transformers, and high-temperature splicing

Temperature Resistance: -73 to +260°C (-100 to +500°F)

Adhesive Type: Silicone

CHR® 2915-7 Glass-Cloth Tape

Saint-Gobain CHR® 2915-7 combines a heat-resistant fiberglass cloth backing coated with a silicone adhesive that withstands high temperatures. It's an exceptionally strong, abrasion-resistant tape with maximum solvent resistance.

Application Ideas: General industrial electrical maintenance, high-temperature splicing and wrapping, motor rewind overwrap, protective wrapping of wire and cable, high-temperature masking tape for welding stainless steel, and light-duty plasma or flame-spray masking

Temperature Resistance: -73 to +260°C (-100 to +500°F)

Adhesive Type: Silicone

CHR® 2915-10 Glass-Cloth Tape

Saint-Gobain CHR® 2915-10 is engineered with a heat-resistant fiberglass cloth backing coated with a silicone adhesive that withstands high temperatures. At 0.254 mm (10 mil), it's the thickest gauge in the CHR 2915 line. This exceptionally strong, abrasion-resistant tape offers maximum solvent resistance and is rated for continuous operation up to 260°C.

Application Ideas: General industrial electrical maintenance, high-temperature splicing and wrapping, motor rewind overwrap, protective wrapping of wire and cable, high-temperature masking tape for welding stainless steel, light-duty plasma or flame-spray masking

Temperature Resistance: -73 to +260°C (-100 to +500°F)

Adhesive Type: Silicone

Nitto 188UL Glass-Cloth Adhesive Tape

Nitto 188UL is a glass-cloth adhesive tape with a silicone adhesive coating, providing superior mechanical strength and electrical insulation. It's rated for continuous use up to 180°C.

Application Ideas: Electrical insulation for transformers and coils, part covering

Temperature Resistance: Continuous use to 180°C

Adhesive Type: Silicone

Nitto P-212 WHT Glass Cloth Tape

Nitto P-212 WHT is a glass cloth carrier tape with a silicone adhesive, offering a high thermal rating and superior solvent resistance, tensile strength, and flame retardancy, making it an excellent choice for demanding applications in the aerospace and electrical industries.

Application Ideas: High-temperature cable harness, coil connection and outer wraps, terminal board pads, motor leads, internal connections, slot cell edge taping

Temperature Resistance: 200°C (392°F) UL, 180°C (356°F) CSA

Adhesive Type: Cured Silicone

Nitto P-213LW Glass Cloth Tape

Nitto P-213LW is an acrylic glass cloth tape with outstanding stability and property retention at high temperatures, making it ideal for aerospace, outer space, and electrical applications. It combines high adhesion and strength with excellent resistance to abrasion, puncture, and edge tearing, and exhibits minimal outgassing under high-vacuum conditions.

Application Ideas: Coil lead holding, terminal board anchoring, coil connection insulating, coil outer wraps, slot insulation, motor leads, cable harness wrapping

Adhesive Type: Acrylic

Intertape 4618 Glass Cloth Tape

Intertape 4618 is an inert, high-strength glass cloth tape with a heat-resistant silicone adhesive for high-temperature applications. It resists edge fraying and rotting, is flexible and varnish-absorbent, and is designed for use where solvent resistance, flame retardancy, and abrasion resistance are required.

Application Ideas: High-temperature coil insulation wrap, harness wrapping, splicing, bundling and banding heavy-gauge magnet wire in motor repair shops, and slot cell edge taping

Temperature Resistance: 200°C

Adhesive Type: Thermosetting Silicone

EMI.8107 Glass Cloth Tape

EMI.8107 pairs a tightly woven glass cloth backing with a high-temperature, pressure-sensitive silicone adhesive. Designed as a coil wrap for capacitors and transformers, it provides heat resistance and flame retardancy for demanding electrical applications.

Application Ideas: Capacitor and transformer coil wrap, high-temperature sealing and bundling

Adhesive Type: High Temperature Silicone Pressure Sensitive Adhesive

EMI.FG Woven Fiberglass Tape

EMI.FG Tape is composed of 100% texturized E-glass fibers. It offers outstanding temperature resistance, high tensile strength, low thermal conductivity, and excellent chemical resistance.

Application Ideas: Various industrial insulation applications; a good substitute for asbestos for 1000°F applications

Temperature Resistance: Fabric is rated for 1000°F continuous and remains stable to 1500°F with Vermiculite coating. 2000°F Intermittent